| S2012 20 Amp DCC Power Supply |
Regulated power supply delivers more power with less heat for more efficient booster operation.
Operate up to 4 Five amp boosters with the PS2012 supply. Scale selectable for use with N, HO or
large scale. DC Ammeter. On/Off Switch. Integral cooling fan. Design coordinated for use with Digitrax products.
DCC TrainShop $144.95
List: $179.99 |
|
| PS515 Power Supply |
Recommended by Digitrax for powering Digitrax Sets & accessories.
Fully Assembled and Ready to Run. Class 2 SELV, Input: AC120V 60Hz, Output: 15 VAC, 5 Amps, 75VA.
Plug your PS515 into an appropriate wall outlet (AC120V 60Hz)
DCC TrainShop $39.95
List: $49.95 |
|
| PS315 Power Supply |
Recommended by Digitrax for powering Digitrax Zephr’s DCS50.
Fully Assembled and Ready to Run. Class 2 SELV, Input: AC120V 60Hz, Output: 15 VAC, 3 Amps, 45VA.
Plug your PS315 into an appropriate wall outlet (AC120V 60Hz)
DCC TrainShop $25.95
List: $29.95 |
|
| AR1 Auto Reversing Controller |
8 amp Auto-reversing control for a single reversing district, Simple to wire.
Tunable trip current lets you use it on any layout from Z to G, AR1 operates with or
without LocoNet so, it can be used on non-Digitrax DCC systems, too.
DCC TrainShop $24.95
List: $29.95
|
|
| PM42 Power Management System
|
Short circuit management and auto reversing without
adding more boosters! PM42 Quad Power Manager lets you use a single booster and
divide its output into 4 power sub-districts for automatic reversing &/or to
improve operation by preempting booster shutdown when a short circuit is detected by the PM42.
If you want to improve operation but don't need the added power (or expense) of adding a booster,
the PM42 is the right answer for you. Each PM42 can run 4 sub-districts off a single booster
in any combination of regular sub-districts and auto reversing sub-districts.
DCC TrainShop $62.95
List: $79.95
|
|
