| BD4 Quad Occupancy Detector |
Cost Effective occupancy detection for 4 detection sections, Outputs for panel mounted LEDs to display occupancy, Detects any powered locomotive, Detects un-powered rolling stock equipped with resistor wheel sets, Transmits occupancy information to your LocoNet System using DS54 or SE8C (sold separately).
DCC TrainShop $24.95
List: $29.95 |
|
| BDL168 LocoNet Occupancy Detector |
The BDL168 provides cost effective occupancy detection for 16 detection sections. For use with one or two RX4 transponder detectors to set up 8 transponding zones and/or operations mode read back. Replaces BDL162.
DCC TrainShop $122.95
List: $149.99 |
|
| RD2 Remote Sensing Diodes |
Remote sensing of 2 detection sections. Eliminates the need for long runs of heavy gauge wire between the BDL16 & remotely located track sections.
DCC TrainShop $8.99
List: $9.99 |
|
| RX4 4-ZoneTransponding Receiver |
4 Zone
Transponding Receiver Add-on for BDL16 series occupancy detectors.
DCC TrainShop $41.95
List: $49.95 |
|
| SE8C Signal Decoder |
Control signals on your layout manually with any LocoNet Throttle and Command Station or automatically with detection and compatible computer software. Drives up to 32 signal heads with popular LED signal types. Simple modular wiring. 16 inputs, 8 Control lines for local turnout control, 8 occupancy sensor inputs. DC or DCC controlled layouts.
DCC TrainShop $99.95
List: $125.00 |
|
| SMBK Signal Mast Base Kit |
Includes 3 Signal Masts that can be used as Signal Mast Bases in any scale or can be painted and detailed and used as N-scale signal masts.
DCC TrainShop $12.95
List: $14.99 |
|
| SDCK Signal Driver Cable Kit |
Materials for making 2 Signal Driver Cables for SE8C. Includes 30’of 10-wire Signal Driver ribbon cable & 8 10-Pin sockets.
DCC TrainShop $16.95
List: $19.99 |
|
| SMHK Signal Mounting Hardware Kit |
Under layout mounting hardware for Signal Driver Cables and their sockets. 6 metal signal straps and 6 signal spacers.
DCC TrainShop $9.95
List: $9.99 |
|
| TSMK Terminal Strip Mounting Kit |
Includes 2 terminal strip boards with resistors for easy installation. Each terminal strip board can handle from 1 to 4 signal heads.
DCC TrainShop $12.95
List: $14.99 |
|
