Decoders
| ATL-S4 |
This decoder is specifically designed for Atlas/Roco Alco S1, S2, S3 and S4 switchers. The decoder has 2 function outputs with built-in Golden Glow LEDs for head and rear lights. We also include a motor isolating kit to prevent decoder damage.
DCC TrainShop $25.95
List: $29.95 |
|
| P2K-SR |
This HO sized decoder designed for the LifeLike Proto 2000 GP7/9/30 and SD60 locomotives in HO Scale. The easiest installation possible, just plug it in! Note: follow LifeLike’s directions about using the correct light bulbs for DCC. 1.3 Amp (2 Amp peak). Four function outputs, smooth and quiet. Size: 1.45" x 0.65".
DCC TrainShop $25.95
List: $29.95 |
|
| KRS-SR |
Special decoder, plug/play for Kato RS-2/RSC-2, 128ss, advanced format. Silent running, special effects, 4 functions, no wires, unique design has pins mounted to decoder for easiest installation in DCC. This decoder also works for Atlas U23,C30,U33, GP40; Kato RS-2, C44-9W; Bachman Doodlebug, Stew., VO1000 and Intermountain.
DCC TrainShop $25.95
List: $29.95 |
| SW9-SR |
This decoder is made to fit the LifeLike HO Scale SW9/SW1200 switcher. Easy installation exactly replaces the existing PC board in the locomotive. No need to remove the weight. The decoder provides a means to install a white LED or 12 Volt bulb as headlight. Because the 1.5 Volt rear light in this locomotive is difficult to replace we provide a dropping resistor right on the decoder. Three function outputs. Size: 0.100" thick - fits P2K SW8/SW9/SW1200.
DCC TrainShop $25.95
List: $29.95 |
|
| D13SR |
1.3
Amp (2 Amp peak) rating and four function outputs. Size:
1.35" x 0.63" x 0.110" (very thin).
DCC TrainShop $16.96
List: $19.95 |
|
| D13SRJ |
This HO
sized decoder with nine-pin wiring harness
provides easy installation. With 1.3 Amp (2 Amp peak) motor
drive it also has six function outputs. Size: 1.50" x
0.63" x 0.25".
DCC TrainShop $16.96
List: $19.95 |
|
| D13SRP |
1.3
Amp (2 Amp peak) rating, four function outputs, and
eight-pin plug. Size: 1.35" x 0.63" x 0.110".
DCC TrainShop $22.95
List: $25.95 |
|
| D14SRP |
HO sized 1.3 Amp Silent
Running™ decoder
Direct plug in to most locos with 8 pin socket
Small - .90" x .63" with centered 9 pin plug
4 EFX (extended effects) lighting outputs
Fits these locos: AtlasGP7, Atlas GP40, Atlas U33C, Atlas U36C, Atlas RS-11, Atlas U23B, Atlas C30-7, Atlas AEM7, Kato RS2, Kato RSC2, KAto SD40-2, Kato SD45, Kato GP35, Bachmann 2-8-0, Bachmann K4, Bachmann Acela, LifeLike FA1/FB1, ER Models Shark, ER Models FP7, Stewart RS12
DCC
TrainShop $25.95
List: $29.95
|
|
| D15SR |
This
HO sized decoder with 1.3 Amp (2 Amp peak) motor drive also has
six function outputs.
Size: 1.00" x 0.63" x
0.25".
DCC TrainShop $25.95
List: $29.95 |
|
| D15SRP |
This
HO sized decoder with 1.3 Amp (2 Amp peak) motor drive also has
six function outputs. Terminates in an eight-pin plug. Size:
1.00" x 0.63" x 0.25".
DCC TrainShop $30.56
List: $35.95 |
|
| DA-SR |
Easy
installation in many locomotives with Kato drive mechanisms such
as Atlas/Stewart/Kato and Proto 1000. This decoder has five
function outputs. Size: 2.85" x 0.65" x 0.125"
(thin).
DCC TrainShop $22.95
List: $24.95 |
|
| BACH-DSL |
This
decoder is specifically designed as a replacement for
"Bachmann DCC Equipped" diesels. Providing a more
smooth, more quiet operation. The decoder has 4 function
outputs. Complete with 2 Golden Glow LEDs in the
package.
DCC TrainShop $16.96
List: $19.95 |
 |
|
|
